1800mA constant current led driver

1.Constant current led driver 2.Cooling by fresh air conversion 3.100% full load burn-in test 4.reliable reputation

1800mA constant current led driver

FEATURE:

1.Wide range of output power to maintain high fficiency.

 2.All series are equipped with power factor compensation,high efficiency and energy saving.

3.Maintain constant high conversion efficiency even the load changes.("CCE"for short)

4.Automatic clamping circuit protection,a special protective function,never overvoltage.

5.Suitable for all-weather,working temperature range:-40 degrees +50 degrees

6.Protection:short circuit,over current,over load,over temperature.     

Specification
Model Number	PAI-381500-OT
Output	DC Voltage	38v±1 percent
	Constant voltage	32-38v
	Rated Current	1800±50mA
	Ripple&Roise(MAX)	≤300MVP-P
	Line Regulation	±2 percent
	Load Regulation	±3 percent
	Setup Time	8ms
Input	Voltage Range	170-250V
	Frequency Range	43-65Hz
	Transfer Efficiency	90 percentage
Protection	Over current	Protection type:Output limited power
	Short current	Protection type:According to the circuit type: hiccup mode, or zero-euro short circuit, input power limit ≤ 5W.
	Over voltage	Protection type:Automatic clamp circuit, there is special protection,If there is no special protection, is in the maximum power limit.
	Over temperature	temperature control protection(85 degrees±5 degrees
Environment		Automatic recovery below 65 degrees
	Working timp	-30~50 degrees
	Operation temp	Waterproof grade:IP67
	Stage temp and humidity	-40~+80 degrees
Safety&EMC	Safety stadards	VL EN61347-1  EN61347-2-13
	Withstand voltage	I/P-O/P:3.75KVAC  I/P-FG:1.88KVAC  O/P-FG:0.5KVAC (VL VDE standard)
	Insulation resistance	I/P-O/P:I/P-FG,O/P-FG:100M Ohms/500VDC/25°C/70 percentRH
	EMI	EN55015  EN55022(CISPR22) Class B
	Harmonic current	EN61000-3-2 Class C(≥50% load);EN61000-3-3
Others	MTBF	≥15000h(environmental temp is 40°C)
	Dimension(MM)	160×71×39   200×75×45     240×75×45(The length is including installation dimensions.)
	Packing
NOTES	1.All parameters not specially mentioned are measured at 230VAC input,rated load and ambient temperature.
	2.Safety&EMC design references:EN60598-1,subject 8750(uL)
	3.Output rated voltage for constant current stystem .This is suitable for many LED equipments, but please reconfirm if it is suitable for some special electrical system before using.
	4.Power is considered as the last part of the devices . Therefore, the power of EMC performance will be affected by the appliances,the final equipment manufacturers must  regain the qualification after installation.

1800mA constant current led driver